DXXA 3900 D1270 H3000 0/ATM RW

Picture of DXXA 3900 D1270 H3000 0/ATM RW
Picture of DXXA 3900 D1270 H3000 0/ATM RW Picture of DXXA 3900 D1270 H3000 0/ATM RW
  • Storage tank with intermediate bottom
  • Nominal volume in l: 3900
  • Diameter internal in mm: 1270
  • Height H in mm: 3000
  • Height Z in mm: 3650
  • Geometrical volume [l]: 3932
  • Volume below [l]: 1950
  • Volume above [l]: 1950
  • Use: Wine fermentation and storage
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 109105
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Adjustable legs type LN, with closed hygienic design
  • Height: N=400 mm
  • Number of legs: G=3
  • Leg base thickness (mm): 8
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with footplate
  • Thread spindle plate: FI80X32
  • Spindle: M24X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX080-24-100
Bottom
Add comment
  • Type KE, cone eccentrical
  • Nominal diameter D (mm): 1270
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Bottom height (mm): 105
Add comment
  • External visible surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Wall
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • Ladder-Holder L420_FI21,3 EN1.4301
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type KE, cone eccentrical
  • Nominal diameter D (mm): 1270
  • Thickness of base material: S=1,5 mm
  • Material: EN1.4404 AISI316L
  • Bottom height (mm): 105
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
In-Between Bottom
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 1270
  • Thickness of base material: S=1,5 mm
  • Material: EN1.4404 AISI316L
  • Inclination α=15°
  • Bottom height (mm): 170
Add comment
  • External visible surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • In-between bottom ring
  • Nominal diameter D (mm): 1270
  • Material: EN1.4404 AISI316L
Manhole Alternative options
Add comment
Standard
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: SK OP
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10 S-ROC
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: SK OP
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
N01_1
Add comment
  • DKE, drain port with elbow
  • Size: DN40
  • Standard: DIN11851
  • Type: DKE
  • Base material thickness: S=2,0mm
  • Material: EN 1.4301/ASTM304
N01 Alternative options
Add comment
Standard
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG5/4" external thread cap
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG4/4" external thread cap
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG6/4" external thread cap
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
Add comment
  • Butterfly valve DN40 MO P32 5/4''WG ZN 1.4301 plug
Add comment
  • Butterfly valve VI DN40 MO P32 6/4''WG ZN 1.4301 plug
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
N02
Add comment
  • DKC, drain port with tube
  • Size: DN40
  • Standard: DIN11851
  • Type: DKC
  • Base material thickness: S=1,5 mm
  • Material: EN1.4404 AISI316L
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG5/4" external thread cap
N10 Alternative options
Add comment
Standard
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG5/4" external thread cap
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG4/4" external thread cap
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG6/4" external thread cap
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
Add comment
  • Butterfly valve DN40 MO P32 5/4''WG ZN 1.4301 plug
Add comment
  • Butterfly valve VI DN40 MO P32 6/4''WG ZN 1.4301 plug
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Base material thickness: S=1,5 mm
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Sampling port
  • Size: DN20
  • Standard: DIN11851
  • Type: DEG
  • Base material thickness: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Mark: ART.1321020
  • Manufacturer ID: ES
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN20 cone nut
  • Connector 2: Φ10 mm
N12
Add comment
  • Level indicator with scale
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/20
  • Standard: DIN11851
  • Gasket: Tube PLEXI
  • Material: EN 1.4301/ASTM304
  • Type: NIV
N13
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: internal thread
  • Base material thickness: S=3,0 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Plug ET 1/2" 1.4301
N14
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Base material thickness: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG5/4" external thread cap
N15
Add comment
  • Sampling port
  • Size: DN20
  • Standard: DIN11851
  • Type: DEG
  • Base material thickness: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Mark: ART.1321020
  • Manufacturer ID: ES
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN20 cone nut
  • Connector 2: Φ10 mm
N16
Add comment
  • Level indicator with scale
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/20
  • Standard: DIN11851
  • Gasket: Tube PLEXI
  • Material: EN 1.4301/ASTM304
  • Type: NIV
N17
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: internal thread
  • Base material thickness: S=3,0 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Plug ET 1/2" 1.4301
N30
Add comment
  • Filling connector
  • Size: tube Φ58 mm / thread RD78 DIN
  • Standard: DIN11851
  • Mark: 33° inclination
  • Type: POL
  • Base material thickness: S=2,0mm
  • Material: EN1.4404 AISI316L
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
N31
Add comment
  • Filling connector
  • Size: tube Φ58 mm / thread RD78 DIN
  • Standard: DIN11851
  • Mark: 33° inclination
  • Type: POL
  • Base material thickness: S=2,0mm
  • Material: EN1.4404 AISI316L
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
Documentation Alternative options
Add comment
Standard
  • Documentation: General arrangement drawing
Add comment
  • Custom made general arrangement drawing (appearance, main dimensions and external dimensions)
Add comment
  • Documentation: Instruction manual
Add comment
  • Documentation: Guarantee statement
Add comment
  • Documentation: Declaration of Conformity
Packaging
Add comment
  • Pallet for tank transport
Add comment
  • Transport AT
N01
Add comment
  • Nut
  • Size: DN40
  • Standard: DIN11851
  • Mark: Chain gasket
  • Type: Blind nut
  • Material: EN 1.4301/ASTM304
  • Hygiene class H3
N10
Add comment
  • Nut
  • Size: DN40
  • Standard: DIN11851
  • Mark: Chain gasket
  • Type: Blind nut
  • Material: EN 1.4301/ASTM304
  • Hygiene class H3
N18
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Mark: 15°
  • Base material thickness: S=1,5 mm
  • Material: EN 1.4301/ASTM304
N31
Add comment
  • Top manway, outswing door
  • Size: DN420
  • Mark: LA D22E H100/220
  • Gasket EPDM Ethylene propylene
  • Material: EN1.4404 AISI316L
N32
Add comment
  • Top manway, outswing door
  • Size: DN200
  • Mark: LA D22E H100/220
  • Gasket EPDM Ethylene propylene
  • Material: EN1.4404 AISI316L







Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.