MXXS 570 D700 G1050 H750 0/ATM S

Picture of MXXS 570 D700 G1050 H750 0/ATM S
  • Small rectangular storage tank
  • Nominal volume in l: 570
  • Width D in mm: 700
  • Depth G in mm: 1050
  • Height H in mm: 750
  • Height Z in mm: 1050
  • Use: Wine fermentation and storage
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 111143
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Legs Type M
  • Height: N=200 mm
  • Quantity of legs: G=4
  • Material: EN 1.4301/ASTM304
Bottom
Add comment
  • ME, bottom
  • Width D [mm]: 700
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Bottom height (mm): 750
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Wall
Add comment
  • Type M, tank wall rectangular
  • Width D [mm]: 700
  • Depth G (mm): 750
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is without further surface treatment and roughness control. Stainless steel is protected against scratches with protective film.
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • ME, bottom
  • Width D [mm]: 700
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Bottom height (mm): 750
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Support for stackable tanks
  • Height: N=100mm
  • Quantity of legs: G=4
  • Material: EN 1.4301/ASTM304
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: SK OP
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
N01_1
Add comment
  • DKE, drain port with elbow
  • Size: DN40
  • Standard: DIN11851
  • Type: DKE
  • Material: EN 1.4301/ASTM304
N10
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Sampling port
  • Size: DN20
  • Standard: DIN11851
  • Type: DEG
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Mark: ART.1321020
  • Manufacturer ID: ES
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN20 cone nut
  • Connector 2: Φ10 mm
N30
Add comment
  • Tank inlet
  • Size: tube Φ58 mm / Thread RD78 DIN
  • Standard: DIN11851
  • Mark: 33° inclination
  • Type: POL
  • Material: EN1.4404 AISI316L
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
Documentation
Add comment
  • Instruction manual
Add comment
  • General arrangement drawing
Add comment
  • Documentation: Guarantee statement
Add comment
  • Declaration of Conformity
N01
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
N10
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread







Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.