PIPS 12500 D2450 H2000 0/ATM

  • Punch-down fermenter with pip removal system
  • Nominal volume in l: 12500
  • Diameter internal in mm: 2450
  • Height H in mm: 2000
  • Height Z in mm: 5550
  • Min. volume [l]: 6500
  • Max. volume [l]: 9000
  • Use: Grape pomace fermentation
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 110341
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=1500 mm
  • Tubular leg diameter (mm): Φ219,1 mm
  • Quantity of legs: G=4
  • Leg base thickness (mm): 15
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with baseplate
  • Spindle baseplate: FI150X37
  • Spindle: M24X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX150-24-100
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Bottom
Add comment
  • Reinforcement plate
  • Material: EN 1.4301/ASTM304
Add comment
  • KP Cone truncated
  • Nominal diameter D (mm): 2450
  • Material: EN 1.4301/ASTM304
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Wall
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Ladder-Holder L420_FI21,3 EN1.4301
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Wall 1
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • V2, jacket laser welded
  • Double jacket height h (mm): 750
  • Active surface ca. [m2]: 4,4
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Wall 2
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type BM, torispherical head
  • Nominal diameter D (mm): 2450
  • Outside diameter De (mm): 2458
  • Thickness of base material: S=4,0mm
  • Material: EN 1.4301/ASTM304
  • Standard DIN 28011
  • Bottom height (mm): 475
Add comment
  • External visible surface is GROUND. Final surface roughness isn't defined. Grinding leads to a uniform and aesthetic surface quality.
Add comment
  • Internal product contact surface is GROUND. Final surface roughness isn't defined. Grinding leads to a uniform and aesthetic surface quality.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
Pillow Plate
Add comment
  • Connection V2
  • Mark: 2XG3/4"FM 1XG1/2"FF
  • Material: EN 1.4301/ASTM304
Manhole Alternative options
Add comment
Standard
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10 S-ROC
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Rectangular door outward opening,
  • Size: 400X500
  • Mark: SK DO
  • Material: EN 1.4301/ASTM304
Maceration Alternative options
Add comment
Standard
  • Punch-down device double PMF2
  • Nominal diameter D (mm): 2450
  • Material: EN 1.4301/ASTM304
Add comment
  • Punch-down device with rotation PMR1
  • Nominal diameter D (mm): 2450
  • Material: EN 1.4301/ASTM304
Add comment
Standard
  • Collecting cone for pips
  • Size: DN100
  • Nominal diameter D (mm): 100
  • Standard: DIN11851
  • Type: manual butterfly valve, observation window, pneumatic valve
  • Material: EN 1.4301/ASTM304
Add comment
  • Collecting cone for pips
  • Size: DN100
  • Nominal diameter D (mm): 100
  • Standard: DIN11851
  • Type: manual butterfly valve
  • Material: EN 1.4301/ASTM304
Add comment
  • Collecting cone for pips
  • Size: DN100
  • Nominal diameter D (mm): 100
  • Standard: DIN11851
  • Type: manual butterfly valve, observation window
  • Material: EN 1.4301/ASTM304
Add comment
Standard
  • Pneumatic cylinder PCG
  • Nominal diameter D (mm): 160
  • Type: B1400, stroke 1400 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Pneumatic cylinder PCG_RO, rotating function
  • Nominal diameter D (mm): 125
  • Type: B1400, stroke 1400 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • PIP, drive and scraper of the system for removing pips during maceration and automatic discharge of grape skins
  • Nominal diameter D (mm): 1000
  • Material: EN 1.4301/ASTM304
Control Unit Alternative options
Add comment
Standard
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage two pneumatic cylinders for cap submerging and to controll and regulate the temperature of the product in the tank. It also allows the management of the external must remounting pump, which is connected to the control box and the management of the system for removal of pips and discharge of grape skins.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage two pneumatic cylinders for cap submerging and to controll and regulate the temperature of the product in the tank. It also allows the management of the must remounting pump, which is mounted on the fermenter and the management of the system for removal of pips and discharge of grape skins.
Pump over
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Sieve on racking port
  • Type: h500 1900
  • Material: EN 1.4301/ASTM304
Add comment
  • Tube dismountable
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Sparger
  • Type: rotational sparger R50
  • Material: EN 1.4301/ASTM304
N01_1
Add comment
  • Nozzle DIN
  • Size: DN100
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
N10
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Sampling port
  • Size: DN20
  • Standard: DIN11851
  • Type: DEG
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Mark: ART.1321020
  • Manufacturer ID: ES
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN20 cone nut
  • Connector 2: Φ10 mm
N12
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: external thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Thermometer well R1/2"-L=220MM
N30
Add comment
  • Filling connector
  • Size: tube Φ58 mm / thread RD78 DIN
  • Standard: DIN11851
  • Mark: 0°
  • Type: POL
  • Material: EN1.4404 AISI316L
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
N31
Add comment
  • Top Manway outward opening.
  • Size: DN420
  • Mark: LA D22E H300/420
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Documentation
Add comment
  • Instruction manual
Add comment
  • General arrangement drawing
Add comment
  • Guarantee statement
Add comment
  • Declaration of Conformity CE
Packaging
Add comment
  • Palet for transport
Temperature control
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: external thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Thermometer well R1/2"-L=220MM
Add comment
  • Temperature regulation
  • Type: Mounted SPR8 temperature regulator, HSE01 connection module, and solenoid valve.
Add comment
  • Temperature regulation Type: SPR8 HSE 1XEMO Temperature regulator SPR8, connexion modul HSE01 and motorized valve
Pump over
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
Add comment
  • Pump
  • Type: The most remounting pump Liverani MINOR 40 6900l/h; 1,5kW; 900Rpm
  • Material: EN 1.4301/ASTM304
N01
Add comment
  • Ball valve
  • Manufacturer ID: VI
  • Size: DN100
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN100 cone nut
  • Connector 2: DIN11851 DN100 external thread
N10
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread








Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.