FAQ

LMXX 1000 D950 H1470 0/2,5

Picture of LMXX 1000 D950 H1470 0/2,5
  • Brite beer tank, mini
  • Nominal volume in l: 1000
  • Internal diameter in mm: 950
  • Height H in mm: 1470
  • Geometrical volume [l]: 1100
  • Use: Beer maturation
  • Min. operating press. [barg]: 0
  • Max. operating press. [barg]: 2,5
  • Test pressure [barg]: 3,6
MATNR: 128081
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=400 mm
  • Tubular leg diameter (mm): Φ114,3 mm
  • Number of legs: G=3
  • Leg base thickness (mm): 8
  • Leg base thread: M16
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with baseplate
  • Spindle baseplate: FI80X39
  • Spindle: M16X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX080-16-100
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Tank
Add comment
  • Internal tank
  • Nominal volume in l: 1000
  • Internal diameter in mm: 950
  • Tank wall height h (mm): 1470
  • Bottom BM, dished
  • Jacket E, cylindrical
  • Lid BM, dished
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
  • Material: EN 1.4301/ASTM304
Add comment
  • Laser engraved identification plate
  • Type: Identification PED
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Temperature control
Add comment
  • Welded thermometer well
  • Mark: FI12/L230
  • Material: EN 1.4301/ASTM304
Pillow Plate
Add comment
  • Laser welded double jacket, type V1
  • Double jacket height h (mm): 1250
  • Active surface ca. [m2]: 3,5
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Add comment
  • Connector V1
  • Mark: 2XG1"IT
  • Material: EN 1.4301/ASTM304
Manhole
Add comment
  • Top manway, outswing door
  • Size: DN420
  • Mark: SK D2 -1/ 3
  • Material: EN 1.4301/ASTM304
Cleaning/CIP
Add comment
  • Tube dismountable
  • Size: 1"(25,4x1,65)
  • Standard: TC
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"(50,5)
  • Connector 2: G1/4"IT
  • Connector 3: G3/8"ET
Add comment
  • Ball valve
  • Size: G3/8"
  • Material: EN 1.4301/ASTM304
  • Connector 1: G3/8"IT
  • Connector 2: G3/8"IT
Add comment
  • Pressure gauge A2 0-4bar fi63 1/4"
N01_1
Add comment
  • DTT, drain and racking port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Mark: CONE DIN
  • Material: EN 1.4301/ASTM304
N10
Add comment
  • Sample valve port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Manufacturer ID: ES/SK
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"(50,5)
N12
Add comment
  • Nozzle TC
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • OBJ
  • Standard: DIN32676
  • Type: TC
  • Dimension A (mm): 50,5
  • Material: EN 1.4301/ASTM304
  • Certificate: N/R
Add comment
  • CEP
  • Standard: DIN32676
  • Type: TC
  • Dimension A (mm): 50,5
  • Material: EN1.4404 AISI316L
  • Certificate: 3.1
Add comment
  • TESN
  • Size: 1"1/2
  • Standard: BS4825-3
  • Mark: PLOŠČ
  • Type: TC
  • Dimension A (mm): 50,5
  • Dimension B (mm): 35,1
  • Material: EPDM
  • Certificate: N/R
N30
Add comment
  • Nozzle TC
  • Size: 2"(51)/64
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Safety valve
  • Mark: K64VP51.4
  • Manufacturer ID: TASSALINI
  • Size: 2"
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC2"(64)
  • Max. operating press. [barg]: -0,01/ 2,5
Add comment
  • Safety valve
  • Mark: 3369.02.5/2108-2,5*E*
  • Size: DN8
  • Material: EN1.4404 AISI316L
  • Connector 1: G1/2"ET
  • Max. operating press. [barg]: 2,5
  • Certificate: Declaration of Conformity CE
Documentation
Add comment
  • Sestavna risba 1.kategorija
Add comment
  • Documentation: Declaration of Conformity PED (Pressure Equipment Directive) 2014/68/EU
Add comment
  • Instruction manual
Add comment
  • Documentation: Guarantee statement
Add comment
  • Certificates for pressure retaining parts
Temperature control
Add comment
  • Solenoid valve ODE 21HT5K0V160 - NC G3/4"
Add comment
  • Coil connection for solenoid valves M23
Add comment
  • Temperature regulation
  • Type: Temperature Regulator SPR8, cable 4 m
  • Manufacturer ID: SK
Add comment
  • Temperature regulation
  • Type: Connection module HSE01
Cleaning/CIP
Add comment
  • Spray ball
  • Nominal diameter D (mm): 40
  • Mark: 4.700.39.04-B
  • Material: EN1.4404 AISI316L
  • Manufacturer ID: VI
  • Connector 1: CLIP 22/20 mm
  • Spray diameter: 4,7 M
  • Flow rate: 3,7 M3/H 1 BAR
Add comment
  • Spray ball
  • Nominal diameter D (mm): 24
  • Mark: V-MRE
  • Material: EN1.4404 AISI316L
  • Manufacturer ID: VI
  • Connector 1: CLIP 22/20 mm
  • Spray diameter: 2,2 M
  • Flow rate: 1,26 M3/H 1 BAR
Add comment
  • OBJ
  • Standard: DIN32676
  • Type: TC
  • Dimension A (mm): 50,5
  • Material: EN 1.4301/ASTM304
  • Certificate: N/R
Add comment
  • TESN
  • Size: 1"
  • Standard: BS4825-3
  • Mark: PLOŠČ
  • Type: TC
  • Dimension A (mm): 50,5
  • Dimension B (mm): 22,1
  • Material: EPDM
  • Certificate: FDA
N01
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: 1"
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"(50,5)
  • Connector 2: TC1"(50,5)
  • Handle: Handle ABS, 13 positions, 170
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"(50,5)
  • Connector 2: DIN11851 DN32 external thread
  • Handle: Handle ABS, 13 positions, 170
Add comment
  • OBJ
  • Standard: DIN32676
  • Type: TC
  • Dimension A (mm): 50,5
  • Material: EN 1.4301/ASTM304
  • Certificate: N/R
Add comment
  • OBJ
  • Standard: DIN32676
  • Type: TC
  • Dimension A (mm): 50,5
  • Material: EN 1.4301/ASTM304
  • Certificate: N/R
Add comment
  • TESN
  • Size: 1"1/2
  • Standard: BS4825-3
  • Mark: PLOŠČ
  • Type: TC
  • Dimension A (mm): 50,5
  • Dimension B (mm): 35,1
  • Material: EPDM
  • Certificate: N/R
Add comment
  • TESN
  • Size: 1"
  • Standard: BS4825-3
  • Mark: PLOŠČ
  • Type: TC
  • Dimension A (mm): 50,5
  • Dimension B (mm): 22,1
  • Material: EPDM
  • Certificate: FDA
N12
Add comment
  • CO2 Stone Size: 1"1/2 Standard: TC Mark: 30 L100 Z450 Type: G1/4"
Add comment
  • Ball valve
  • Manufacturer ID: VI
  • Size: DN10
  • Connector 1: G1/4"IT
  • Connector 2: G1/4"IT
Add comment
  • T-connection 38,1x1,65 TC 50
Add comment
  • OBJ
  • Standard: DIN32676
  • Type: TC
  • Dimension A (mm): 50,5
  • Material: EN 1.4301/ASTM304
  • Certificate: N/R
Add comment
  • TESN
  • Size: 1"1/2
  • Standard: BS4825-3
  • Mark: PLOŠČ
  • Type: TC
  • Dimension A (mm): 50,5
  • Dimension B (mm): 35,1
  • Material: EPDM
  • Certificate: N/R
Accessories
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: 1"
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"(50,5)
  • Connector 2: TC1"(50,5)
  • Handle: Handle ABS, 13 positions, 170
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: 1"1/2
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"1/2(50,5)
  • Connector 2: TC1"1/2(50,5)
  • Handle: Handle ABS, 13 positions, 170
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"(50,5)
  • Connector 2: DIN11851 DN32 external thread
  • Handle: Handle ABS, 13 positions, 170
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"1/2(50,5)
  • Connector 2: DIN11851 DN32 external thread
  • Handle: Handle ABS, 13 positions, 170







Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.