FK2S 8000 D2050 H2500 0/ATM

Picture of FK2S 8000 D2050 H2500 0/ATM
Picture of FK2S 8000 D2050 H2500 0/ATM Picture of FK2S 8000 D2050 H2500 0/ATM
  • Open pump-over fermenter with double jacket
  • Nominal volume in l: 8000
  • Diameter internal in mm: 2050
  • Height H in mm: 2500
  • Height Z in mm: 3400
  • Max. volume [l]: 6500
  • Use: Grape pomace fermentation
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 110416
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs Alternative options
Add comment
Standard
  • Adjustable legs type LN, with closed hygienic design
  • Height: N=500 mm
  • Number of legs: G=4
  • Leg base thickness (mm): 8
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Adjustable legs type LN, with closed hygienic design
  • Height: N=900 mm
  • Number of legs: G=4
  • Leg base thickness (mm): 10
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with footplate
  • Thread spindle plate: FI125X34
  • Spindle: M24X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX125-24-100
Bottom
Add comment
  • O_RA, bottom reinforcement
  • Material: EN 1.4301/ASTM304
Add comment
  • Type RA, flat bottom
  • Nominal diameter D (mm): 2050
  • Thickness of base material: 2,5
  • Material: EN 1.4301/ASTM304
  • Bottom height (mm): 0
Add comment
  • Inclination 5%
Add comment
  • External visible surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Wall
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Reinforcement ring, tubular
  • Nominal diameter D (mm): 2050
  • Tube (mm) 48,3
  • Outer diameter (mm) 2147
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • Ladder-Holder L420_FI21,3 EN1.4301
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Wall 1
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1250
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • V2, jacket laser welded
  • Double jacket height h (mm): 1000
  • Active surface ca. [m2]: 4,5
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Wall 2
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1250
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Floating Lid
Add comment
  • Floating lid with gasket and pump.
  • Tank diameter D (mm): 2050
  • Floating lid diameter (mm): 2020
  • Base material thickness: S=1,2 mm
  • Material: EN 1.4301/ASTM304
  • Base material surface: cold rolled 2R (BA, IIId)
  • Manufacturer ID: SK
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
Add comment
  • Tank inlet
  • Size: tube Φ48 mm / Thread RD78 DIN
  • Standard: DIN11851
  • Mark: Removable tank inlet
  • Material: PE
Temperature control Alternative options
Add comment
Standard
  • Temperature regulation
  • Type: Digital thermometer DT5
  • Mark: D106/L215 EU -50/ 70°C
  • Manufacturer ID: SK
Add comment
  • Temperature regulation
  • Type: Mounted SPR8 temperature regulator, HSE01 connection module, and solenoid valve.
Add comment
  • Temperature regulation Type: SPR8 HSE 1XEMO Temperature regulator SPR8, connexion modul HSE01 and motorized valve
Pillow Plate
Add comment
  • Connection V2
  • Mark: 2XG3/4"FM 1XG1/2"FF
  • Material: EN 1.4301/ASTM304
Manhole Alternative options
Add comment
Standard
  • Rectangular door outward opening,
  • Size: 310X420 mm
  • Mark: LA B5E ODK
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Rectangular door outward opening,
  • Size: 400X500
  • Mark: SK DO
  • Material: EN 1.4301/ASTM304
Add comment
  • Rectangular door outward opening,
  • Size: 410X530 mm
  • Mark: LA B2E ODK
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Pump over
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Junction
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Sieve on racking port
  • Type: h500
  • Material: EN 1.4301/ASTM304
Add comment
  • Tube dismountable
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Sparger
  • Type: rotational sparger R50
  • Material: EN 1.4301/ASTM304
Equipment
Add comment
  • Floating lid crane.
  • Nominal diameter D (mm): 2050
  • Type: Type F2
  • Material: EN 1.4301/ASTM304
Add comment
  • Rope for floating lid
  • Type: windless manually, 350 kg
  • Material: galvanized
N01_1
Add comment
  • DRA, drain port
  • Size: DN40
  • Standard: DIN11851
  • Type: DRA
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Sampling port
  • Size: DN20
  • Standard: DIN11851
  • Type: DEG
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Mark: ART.1321020
  • Manufacturer ID: ES
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN20 cone nut
  • Connector 2: Φ10 mm
N12
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: internal thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Thermometer well R1/2"-L=220MM
Documentation
Add comment
  • Instruction manual
Add comment
  • General arrangement drawing
Add comment
  • Documentation: Guarantee statement
Add comment
  • Declaration of Conformity CE
Bottom
Add comment
  • Forklift support - bottom RA
  • Material: EN 1.4301/ASTM304
Warming Bottom
Add comment
  • Warming bottom
  • Material: EN 1.4301/ASTM304
Add comment
  • Heater with support
  • Type: Heater 2x3000 W
  • Material: N/A not available
Add comment
  • Heater with support
  • Type: Heater 2x3000 W avt
  • Material: N/A not available
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: SK OP
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10 S-ROC
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Control Unit
Add comment
  • The RM control unit is mounted on the tank in a stainless steel box. It is built in on storage tanks and fermenters equipped with appropriate devices. The electronics has three function keys, a 7-segment LED display and three control lights notifying the user about the current status of the control unit. The RM control unit can operate in manual or automatic mode.
  • Type: The controller is programmed to manage two air injecting valves for injecting air into the tank.
Add comment
  • The RM control unit is mounted on the tank in a stainless steel box. It is built in on storage tanks and fermenters equipped with appropriate devices. The electronics has three function keys, a 7-segment LED display and three control lights notifying the user about the current status of the control unit. The RM control unit can operate in manual or automatic mode.
  • Type: The controller is programmed to manage the external must remounting pump, which is connected to the control box.
Add comment
  • The RM control unit is mounted on the tank in a stainless steel box. It is built in on storage tanks and fermenters equipped with appropriate devices. The electronics has three function keys, a 7-segment LED display and three control lights notifying the user about the current status of the control unit. The RM control unit can operate in manual or automatic mode.
  • Type: The controller is programmed to manage the must remounting pump, which is mounted on the fermenter.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage the external must remounting pump, which is connected to the control box and to controll and regulate the temperature of the product in the tank.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage the must remounting pump, which is mounted on the fermenter and to controll and regulate the temperature of the product in the tank.
Pump over
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread
Add comment
  • Pump
  • Type: The most remounting pump Liverani MINOR 40 6900l/h; 1,5kW; 900Rpm
  • Material: EN 1.4301/ASTM304
N01
Add comment
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN40
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: DIN11851 DN40 external thread







Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.