FAQ

WT1U 14080/120 D2100 H4110 0/ATM

  • Hot water tank with double jacket
  • Nominal volume [bbl]: 120
  • Internal diameter [in]: 82,6
  • Height H [in]: 161,8
  • Nominal volume in L: 14080
  • Internal diameter in mm: 2100
  • Height H in mm: 4110
  • Height Z in mm: 5010
  • Height Z [in]: 197,2
  • External diameter [mm]: 2200
  • External diameter [in]: 86,6
  • Geometrical volume [l]: 14962
  • Use: Water preparation
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 132999
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=800 mm
  • Tubular leg diameter (mm): Φ219,1 mm
  • Quantity of legs: G=4
  • Leg base thickness (mm): 15
  • Leg base thread: M36
  • Thread spindle plate: 200X10
  • Material: EN 1.4301/ASTM304
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Bottom
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
Add comment
  • Reinforcement plate
  • Material: EN 1.4301/ASTM304
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 2100
  • Thickness of base material: S=3,0 mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=11°
  • Bottom height (mm): 204
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Insulation
  • Material: stone wool
  • Thickness of base material: S=50mm
Add comment
  • V6, double bottom KC
  • Double jacket height h (mm): 950
  • Active surface ca. [m2]: 6,08
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Wall
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Insulation,
  • Material: stone wool
  • Thickness of base material: S=50mm
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Wall 1
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=3,0 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • V1Z
  • Double jacket height h (mm): 1000
  • Active surface ca. [m2]: 6,4
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Wall 2
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: 2,5
  • Material: EN 1.4301/ASTM304
Add comment
  • Laser welded double jacket, type V1
  • Double jacket height h (mm): 1460
  • Active surface ca. [m2]: 9,3
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Wall 3
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1110
  • Thickness of base material: S=3,0 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Laser welded double jacket, type V1
  • Double jacket height h (mm): 500
  • Active surface ca. [m2]: 3,2
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 2100
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=15°
  • Bottom height (mm): 281
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
Ring Up
Add comment
  • Reinforcement ring, flat
  • Nominal diameter D (mm): 2100
  • Outer diameter (mm) 2200
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
External Bottom
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 2200
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=11°
  • Bottom height (mm): 214
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
External Wall
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1170
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Pillow Plate
Add comment
  • Connection V1
  • Standard: NPT
  • Mark: 2XG1"ZN
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V1
  • Standard: NPT
  • Mark: 2XG1"ZN
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V1
  • Standard: NPT
  • Mark: 2XG1"ZN
  • Material: EN 1.4301/ASTM304
Add comment
  • Solenoid valve ODE 21HN6K0V250-HT-NC NPT1"
Add comment
  • Coil connection for solenoid valves M23
Add comment
  • Connection V6
  • Standard: NPT
  • Mark: 2XG3/4"FM
  • Material: EN 1.4301/ASTM304
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: IZO LA A3E 30X10
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Tube
Add comment
  • Tube dismountable
  • Size: 2"(50,8x1,65)
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle TC
  • Size: 2"(51)/64
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
Cleaning/CIP
Add comment
  • Tube dismountable
  • Size: 1"1/2(38,1x1,65)
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle TC
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle TC
  • Size: 2"1/2(63)/77,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Blind TC
  • Standard: ISO2852
  • Gasket: DIN32676
  • Dimension A (mm): 77,5
  • Material: EN1.4404 AISI316L
Add comment
  • Nozzle with pipe thread
  • Size: G3/4"
  • Standard: external thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Spray ball
  • Nominal diameter D (mm): 44
  • Mark: V-TRB
  • Material: EN1.4404 AISI316L
  • Producer ID: VI
  • Connection 1: G3/4"IT
  • Circle diameter: 2,2 M
  • Flow rate: 4,1 M3/H 1 BAR
Supplement
Add comment
  • DODATEK_CENA_1 EUR_BREZ KSV IN TP - VPIŠI SVOJ TEKST
N01
Add comment
  • DKC, drain port with tube
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Type: DKC_L
  • Material: EN 1.4301/ASTM304
Add comment
  • Junction TC
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(><<)>(>,<(> <<)>)> and polished (C), without grinding.
Add comment
  • VORTEX BREAKER INLINE 38,1
N10
Add comment
  • Nozzle TC
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Nozzle TC
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
N12
Add comment
  • Nozzle TC
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
N13
Add comment
  • Nozzle TC
  • Size: DN20/34TC
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • T PIECE 21,3x1,5 3xTC34
Add comment
  • Clamp TC
  • Standard: DIN32676
  • Dimension A (mm): 34
  • Material: EN 1.4301/ASTM304
Add comment
  • Gasket TC
  • Standard: ISO2852
  • Gasket: DIN32676
  • Gasket EPDM Ethylene propylene
  • Dimension A (mm): 34
  • Dimension B (mm): 18,1
  • Certificarte: N/R
Add comment
  • Level indicator valve TC34 fi20 1.4301
Add comment
  • Pressure sensor PPI110 1/2" 0 do 0,45BAR
Add comment
  • Level indicator with scale
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/20
  • Standard: TC
  • Gasket: Tube PLEXI
  • Material: EN 1.4301/ASTM304
  • Type: NIV
N14
Add comment
  • Sampling port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • TC clamp
  • Standard: DIN32676
  • Dimension A (mm): 50,5
  • Material: EN 1.4301/ASTM304
  • Certificate: N/R
Add comment
  • Gasket TC
  • Standard: BS4825
  • Gasket: DIN32676
  • Gasket EPDM Ethylene propylene
  • Dimension A (mm): 50,4
  • Dimension B (mm): 34,8
  • Certificarte: N/R
Add comment
  • Sample valve ES/SK TC6/4 1.4301
N15
Add comment
  • THERMOMETER WELL PG11x1,5 L=288 15/17 1.4301
N30
Add comment
  • Nozzle TC
  • Size: DN150
  • Standard: TC-DIN
  • Gasket: DIN32676
  • Dimension A (mm): 183
  • Dimension B (mm): 150
  • Dimension C (mm): 154
  • Dimension D (mm): 28
  • Material: EN1.4404 AISI316L
Add comment
  • Blind TC
  • Standard: ISO2852
  • Gasket: DIN32676
  • Dimension A (mm): 167
  • Material: EN1.4404 AISI316L
Add comment
  • Clamp TC
  • Standard: DIN32676
  • Dimension A (mm): 167
  • Material: EN 1.4301/ASTM304
Add comment
  • Gasket TC
  • Standard: BS4825
  • Gasket: DIN32676
  • Gasket EPDM Ethylene propylene
  • Dimension A (mm): 167
  • Dimension B (mm): 146,9
  • Certificarte: FDA, USP Class VI
Documentation
Add comment
  • General arrangement drawing
Add comment
  • Instruction manual
Add comment
  • Guarantee statement
Add comment
  • Declaration of Conformity CE








Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.