CTXX 600 D790 H1250 0/ATM 400V 50HZ 0,

  • Cold water tank
  • Nominal volume in l: 600
  • Internal diameter in mm: 790
  • Height H in mm: 1250
  • External diameter [mm]: 890
  • Use: Water preparation
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 115347
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=400 mm
  • Tubular leg diameter (mm): Φ88,9 mm
  • Quantity of legs: G=3
  • Leg base thickness (mm): 8
  • Leg base thread: M16
  • Thread spindle plate: Φ100X4 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
Bottom
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 790
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=8°
  • Bottom height (mm): 56
Add comment
  • Insulation
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Wall
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1250
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Insulation,
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Add comment
  • Laser welded double jacket, type V1
  • Double jacket height h (mm): 1000
  • Active surface ca. [m2]: 2,3
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 4,3
  • Material: EN 1.4301/ASTM304
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Lid
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 790
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=8°
  • Bottom height (mm): 56
Add comment
  • Insulation
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
External Bottom
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 890
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=8°
  • Bottom height (mm): 63
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Extrernal Wall
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1340
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
External Lid
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 890
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=8°
  • Bottom height (mm): 63
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Pillow Plate
Add comment
  • Connection V1
  • Mark: 2XG3/4"FM
  • Material: EN 1.4301/ASTM304
Add comment
  • Solenoid valve ODE 21HT5K0V160 - NC G3/4"
N01
Add comment
  • Pump
  • Mark: Water circulation system - total drain with recirculation pipe, 2 x butterfly valve 1˝ TC
  • Type: PQA 60 EPDM PDR
N10
Add comment
  • The RH control unit
  • Type: The controller is programmed to manage the must remounting pump, which is mounted on the fermenter and to controll and regulate the temperature of the product in the tank.
N11
Add comment
  • Level indicator with scale
  • Size: DN20
  • Nominal diameter D (mm): Tube 10/16
  • Standard: TC
  • Gasket: Tube PVC
  • Material: EN 1.4301/ASTM304
  • Type: NIV
N12
Add comment
  • Racking port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
N13
Add comment
  • Welded thermometer well
  • Mark: FI12/L230
  • Material: EN 1.4301/ASTM304
N30
Add comment
  • Nozzle with pipe thread
  • Size: G3/4"
  • Standard: external thread
  • Material: EN 1.4301/ASTM304
N31
Add comment
  • Top manway, outswing door
  • Size: DN420
  • Mark: LA D22E H100/220
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
N32
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
Add comment
  • Filling connector
  • Size: tube Φ58 mm / thread RD78 DIN
  • Standard: DIN11851
  • Mark: 0°
  • Type: POL
  • Material: EN1.4404 AISI316L
N33
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
Documentation
Add comment
  • Instructions for safe use and maintenance
Add comment
  • Guarantee statement
Add comment
  • EU Declaration of Conformity
Add comment
  • Technical drawing

Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.