KV2A 3900 D1580 H2000 0/ATM RW

Picture of KV2A 3900 D1580 H2000 0/ATM RW
  • Closed pump-over fermenter with double jacket
  • Nominal volume in l: 3900
  • Diameter internal in mm: 1580
  • Height H in mm: 2000
  • Height Z in mm: 2900
  • Geometrical volume [l]: 3995
  • Max. volume [l]: 3100
  • Use: Grape pomace fermentation
  • Min. operating press. [barg]: 0
  • Max. operating pressure [barg]: atmospheric
MATNR: 110099
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs Alternative options
Add comment
Standard
  • Adjustable legs type LN, with closed hygienic design
  • Height: N=500 mm
  • Number of legs: G=3
  • Leg base thickness (mm): 8
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Adjustable legs type LN, with closed hygienic design
  • Height: N=900 mm
  • Number of legs: G=3
  • Leg base thickness (mm): 8
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with baseplate
  • Spindle baseplate: FI105X34
  • Spindle: M24X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX105-24-100
Bottom
Add comment
  • O_RA, bottom reinforcement
  • Material: EN 1.4301/ASTM304
Add comment
  • Type RA, flat bottom
  • Nominal diameter D (mm): 1580
  • Thickness of base material: 2,5
  • Material: EN 1.4301/ASTM304
  • Bottom height (mm): 0
Add comment
  • Inclination 5%
Add comment
  • External visible surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Wall
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • Ladder-Holder L420_FI21,3 EN1.4301
Add comment
  • Laser engraved identification plate
  • Type: Identification
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Wall 1
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • V2, jacket laser welded
  • Double jacket height h (mm): 750
  • Active surface ca. [m2]: 2,3
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Wall 2
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type KE, cone eccentrical
  • Nominal diameter D (mm): 1580
  • Thickness of base material: S=1,5 mm
  • Material: EN1.4404 AISI316L
  • Bottom height (mm): 105
Add comment
  • External visible surface is FLOWERED FINISH.
Add comment
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld chemically treated, cleaned<(>,<)> and polished (C), without grinding.
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
Temperature control Alternative options
Add comment
Standard
  • Temperature regulation
  • Type: Digital thermometer DT5
  • Mark: D106/L215 EU -50/ 70°C
  • Manufacturer ID: SK
Add comment
  • Temperature regulation
  • Type: Mounted SPR8 temperature regulator, HSE01 connection module, and solenoid valve.
Add comment
  • Temperature regulation
  • Type: SPR8 HSE 1XEMO
Pillow Plate
Add comment
  • Connection V2
  • Mark: 2XG3/4"FM 1XG1/2"FF
  • Material: EN 1.4301/ASTM304
Manhole Alternative options
Add comment
Standard
  • Rectangular door outward opening,
  • Size: 410X530 mm
  • Mark: LA B2E ODK
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Rectangular door outward opening,
  • Size: 400X500
  • Mark: SK DO
  • Material: EN 1.4301/ASTM304
Add comment
Standard
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: SK OP
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E 30X10 S-ROC
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Pump over Alternative options
Add comment
Standard
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG5/4" external thread cap
Add comment
  • Butterfly valve DN40 MO P32 5/4''WG ZN 1.4301 plug
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Base material thickness: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Sieve on racking port
  • Type: h1900
  • Material: EN 1.4301/ASTM304
Add comment
  • Tube dismountable
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Sparger
  • Type: rotational sparger R50
  • Material: EN 1.4301/ASTM304
N01
Add comment
  • DRA, drain port
  • Size: DN80
  • Standard: DIN11851
  • Type: DRA
  • Base material thickness: S=4,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Nut
  • Size: DN80
  • Standard: DIN11851
  • Mark: Chain gasket
  • Type: Blind nut
  • Material: EN 1.4301/ASTM304
  • Hygiene class H3
N01_1 Alternative options
Add comment
Standard
  • Ball valve DN80 DIN11851 1.4301
Add comment
  • Butterfly valve
  • Size: DN80
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN80 cone nut
  • Connector 2: DIN11851 DN80 external thread
N10 Alternative options
Add comment
Standard
  • Ball valve
  • Manufacturer ID: ES
  • Size: DN32
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN40 cone nut
  • Connector 2: WG5/4" external thread cap
Add comment
  • Butterfly valve DN40 MO P32 5/4''WG ZN 1.4301 plug
Add comment
  • Racking port with reinforcement
  • Size: DN40
  • Standard: DIN11851
  • Base material thickness: S=2,0mm
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Sampling port
  • Size: DN20
  • Standard: DIN11851
  • Type: DEG
  • Base material thickness: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve
  • Mark: ART.1321020
  • Manufacturer ID: ES
  • Material: EN 1.4301/ASTM304
  • Connector 1: DIN11851 DN20 cone nut
  • Connector 2: Φ10 mm
N12
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: internal thread
  • Base material thickness: S=3,0 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Thermometer well R1/2"-L=220MM
N30
Add comment
  • Filling connector
  • Size: tube Φ58 mm / thread RD78 DIN
  • Standard: DIN11851
  • Mark: 0°
  • Type: POL
  • Base material thickness: S=2,0mm
  • Material: EN1.4404 AISI316L
Add comment
  • Pressure relief valve
  • Mark: E25
  • Size: DN50
  • Material: PE
  • Connector 1: DIN11851 DN50 internal thread
  • Flow rate: 30M3/H
N31 Alternative options
Add comment
Standard
  • Top manway, outswing door
  • Size: DN420
  • Mark: LA D22E H100/220
  • Gasket EPDM Ethylene propylene
  • Material: EN1.4404 AISI316L
Add comment
  • Top manway, outswing door
  • Size: DN200
  • Mark: LA D22E H100/220
  • Gasket EPDM Ethylene propylene
  • Material: EN1.4404 AISI316L
Documentation Alternative options
Add comment
Standard
  • Documentation: General arrangement drawing
Add comment
  • Custom made general arrangement drawing (appearance, main dimensions and external dimensions)
Add comment
  • Documentation: Instruction manual
Add comment
  • Documentation: Guarantee statement
Add comment
  • Documentation: Declaration of Conformity CE
Packaging
Add comment
  • Pallet for tank transport
Add comment
  • Transport AT
Legs
Add comment
  • Forklift support - bottom RA
  • Material: EN 1.4301/ASTM304
Warming Bottom
Add comment
  • Warming bottom
  • Material: EN 1.4301/ASTM304
Add comment
  • Heater with support
  • Type: Heater 2x3000 W
  • Material: N/A not available
Add comment
  • Heater with support
  • Type: Heater 2x3000 W avt
  • Material: N/A not available
Maceration
Add comment
  • Air injection nozzel SK-AIR
  • Type: 3 air injection nozzles Φ180mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Distribution unit
  • Type: 3X manual valve
  • Material: EN 1.4301/ASTM304
Add comment
  • Distribution unit
  • Type: 3x Solenoid valve
  • Material: EN 1.4301/ASTM304
Control Unit
Add comment
  • The RM control unit is mounted on the tank in a stainless steel box. It is built in on storage tanks and fermenters equipped with appropriate devices. The electronics has three function keys, a 7-segment LED display and three control lights notifying the user about the current status of the control unit. The RM control unit can operate in manual or automatic mode.
  • Type: The controller is programmed to manage two air injecting valves for injecting air into the tank.
Add comment
  • The RM control unit is mounted on the tank in a stainless steel box. It is built in on storage tanks and fermenters equipped with appropriate devices. The electronics has three function keys, a 7-segment LED display and three control lights notifying the user about the current status of the control unit. The RM control unit can operate in manual or automatic mode.
  • Type: The controller is programmed to manage the external must remounting pump, which is connected to the control box.
Add comment
  • The RM control unit is mounted on the tank in a stainless steel box. It is built in on storage tanks and fermenters equipped with appropriate devices. The electronics has three function keys, a 7-segment LED display and three control lights notifying the user about the current status of the control unit. The RM control unit can operate in manual or automatic mode.
  • Type: The controller is programmed to manage the must remounting pump, which is mounted on the fermenter.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage the external must remounting pump, which is connected to the control box and to controll and regulate the temperature of the product in the tank.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage the external must remounting pump, which is connected to the control box and to controll and regulate the temperature of the product in the tank. It also allows the management of the three air injecting valves for injecting air into the tank.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage the must remounting pump, which is mounted on the fermenter and to controll and regulate the temperature of the product in the tank.
Add comment
  • The RV control unit is mounted on the tank in a stainless steel box. It enables manual and automatic operating mode. In automatic mode of operation, the wine fermenter operates in accordance with the preset parameters. Operation parameters are factory set and the user can change them within limit values and adjust the fermenter operation largely to his wishes and needs. It has LCD display (4 rows with 20 signs). The user interface is designed so as to allow easy and simple operation of the fermenter and informs the user about the entered data and course of the program. The user enters data through a keyboard.
  • Type: The controller is programmed to manage the must remounting pump, which is mounted on the fermenter and to controll and regulate the temperature of the product in the tank. It also allows the management of the three air injecting valves for injecting air into the tank.
Pump over
Add comment
  • Pump
  • Type: The most remounting pump Liverani MINOR 40 6900l/h; 1,5kW; 900Rpm
  • Material: EN 1.4301/ASTM304







Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.