FAQ

LTIX 4000 D1500 H2250 0/2,5

Picture of LTIX 4000 D1500 H2250 0/2,5
  • Brite beer tank, insulated
  • Nominal volume in l: 4000
  • Internal diameter in mm: 1500
  • Height H in mm: 2250
  • Height Z in mm: 3440
  • External diameter [mm]: 1600
  • Geometrical volume [l]: 4675
  • Use: Beer maturation
  • Min. operating press. [barg]: 0
  • Max. operating press. [barg]: 2,5
  • Test pressure [barg]: 3,6
MATNR: 128839
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=500 mm
  • Tubular leg diameter (mm): Φ139,7 mm
  • Quantity of legs: G=4
  • Leg base thickness (mm): 8
  • Leg base thread: M24
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with footplate
  • Thread spindle plate: FI125X34
  • Spindle: M24X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX125-24-100
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Tank
Add comment
  • Internal tank
  • Nominal volume in l: 4000
  • Internal diameter in mm: 1500
  • Tank wall height h (mm): 2250
  • Bottom BM, dished
  • Jacket E, cylindrical
  • Lid BM, dished
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
  • Material: EN 1.4301/ASTM304
External tank
Add comment
  • External tank
  • Nominal volume in l: 4000
  • External diameter [mm]: 1600
  • Tank wall height h (mm): 2250
  • Bottom KC A=15, centric cone
  • Jacket E, cylindrical
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Material: EN 1.4301/ASTM304
  • Insulation: PU Insulation, welded tank wall
Add comment
  • Laser engraved identification plate
  • Type: Identification PED
  • Size: 145X100 mm
  • Material: EN 1.4301/ASTM304
Temperature control
Add comment
  • Welded thermometer well
  • Mark: FI12/L230
  • Material: EN 1.4301/ASTM304
Add comment
  • Cable tube
  • Nominal diameter D (mm): Tube 11/14
  • Type: KAB_TER
  • Material: EN 1.4301/ASTM304
Add comment
  • Temperature regulation
  • Type: Mounted SPR8 temperature regulator, HSE01 connection module, and solenoid valve.
Pillow Plate
Add comment
  • V2, jacket laser welded
  • Double jacket height h (mm): 750
  • Active surface ca. [m2]: 2,7
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V2
  • Mark: 2XG3/4"FM 1XG1/2"FF
  • Material: EN 1.4301/ASTM304
Add comment
  • Laser welded double jacket, type V1
  • Double jacket height h (mm): 1000
  • Active surface ca. [m2]: 4,5
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V1
  • Mark: 2XG3/4"FM
  • Material: EN 1.4301/ASTM304
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: IZO LA A17 PED 7BAR
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Cleaning/CIP Alternative options
Add comment
Standard
  • Spray ball
  • Nominal diameter D (mm): 40
  • Mark: 4.700.39.04-B
  • Material: EN1.4404 AISI316L
  • Manufacturer ID: VI
  • Connector 1: CLIP 22/20 mm
  • Spray diameter: 4,7 M
  • Flow rate: 3,7 M3/H 1 BAR
Add comment
  • Spray ball
  • Nominal diameter D (mm): 24
  • Mark: V-MRE
  • Material: EN1.4404 AISI316L
  • Manufacturer ID: VI
  • Connector 1: CLIP 22/20 mm
  • Spray diameter: 2,2 M
  • Flow rate: 1,26 M3/H 1 BAR
Add comment
  • Tube dismountable
  • Size: 1"1/2(38,1x1,65)
  • Standard: TC
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"1/2(50,5)
  • Connector 2: DIN11851 DN25 Male screw
  • Connector 3: G3/8"ET
Add comment
  • Pressure vacume relief valve DN25 Barby&Kuh 909 2,5b
Add comment
  • Ball valve
  • Size: G3/8"
  • Material: EN 1.4301/ASTM304
  • Connector 1: G3/8"IT
  • Connector 2: G3/8"IT
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: 1"1/2
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"1/2(50,5)
  • Connector 2: TC1"1/2(50,5)
  • Handle: Handle ABS, 13 positions, 170
N01
Add comment
  • DTT, drain and racking port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Mark: WELD BM
  • Material: EN 1.4301/ASTM304
Add comment
  • Butterfly valve
  • Manufacturer ID: VI
  • Size: 1"1/2
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC1"1/2(50,5)
  • Connector 2: TC1"1/2(50,5)
  • Handle: Handle ABS, 13 positions, 170
N10
Add comment
  • Sampling port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve ES/SK TC6/4 1.4301
N13
Add comment
  • Level indicator P
  • Size: DN20
  • Nominal diameter D (mm): Tube 10/16
  • Standard: TC
  • Gasket: Tube PVC
  • Material: EN 1.4301/ASTM304
  • Type: Connected with CIP tube
N30
Add comment
  • Nozzle TC
  • Size: 2"(51)/64
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Safety valve
  • Mark: K64VP51.4
  • Manufacturer ID: TASSALINI
  • Size: 2"
  • Material: EN 1.4301/ASTM304
  • Connector 1: TC2"(64)
  • Max. operating press. [barg]: -0,01/ 2,5
Documentation
Add comment
  • Sestavna risba 1.kategorija
Add comment
  • Documentation: Declaration of Conformity PED (Pressure Equipment Directive) 2014/68/EU
Add comment
  • Instruction manual
Add comment
  • Documentation: Guarantee statement
Add comment
  • Certificates for pressure retaining parts
Packaging
Add comment
  • Pallet for tank transport
Pillow Plate
Add comment
  • V7, pillow plate on bottom BM
  • Double jacket height h (mm): 675
  • Active surface ca. [m2]: 0,6
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V7
  • Mark: 2XG3/4"FM
  • Material: EN 1.4301/ASTM304
N12
Add comment
  • Nozzle TC
  • Size: 2"(51)/64
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • CO2 Stone
  • Size: 2"
  • Standard: TC
  • Mark: 30 L100 Z450
  • Type: G3/8"
Add comment
  • Ball valve
  • Size: G3/8"
  • Material: EN 1.4301/ASTM304
  • Connector 1: G3/8"IT
  • Connector 2: G3/8"IT
N31
Add comment
  • Nozzle TC
  • Size: 4"(101)/119
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Blind TC
  • Standard: ISO2852
  • Gasket: DIN32676
  • Dimension A (mm): 119
  • Material: EN1.4404 AISI316L
  • Certificate: 3.1B







Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.