ZKIJ 6000 D1750 H2500 0/2,5 STAND

  • Cylindroconical fermentation tank with insulation, type ZKI
  • Nominal volume [l]: 6000
  • Diameter internal in mm: 1750
  • Height H in mm: 2500
  • Height Z in mm: 4890
  • External diameter [mm]: 1850
  • Geometrical volume [l]: 7800
  • Use: Beer fermentation
  • Mark: STAND
  • Min. operating press. [barg]: 0
  • Max. operating press. [barg]: 2,5
  • Min. design pressure in barg: 0
  • Test pressure [barg]: 3,58
MATNR: 124587
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=1900 mm
  • Tubular leg diameter (mm): Φ219,1 mm
  • Quantity of legs: G=4
  • Leg base thickness (mm): 15
  • Leg base thread: M24
  • Thread spindle plate: 150X8
  • Material: EN 1.4301/ASTM304
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Bottom
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
Add comment
  • Reinforcement plate
  • Material: EN 1.4301/ASTM304
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 1750
  • Thickness of base material: S=4,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=60°
  • Bottom height (mm): 1516
Add comment
  • Internal product contact surface is MECHANICALLY POLISHED to mirror finish. Final surface roughness isn't defined. Polishing leads to a uniform and aesthetic surface quality.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • V6, pillow plate on bottom KC
  • Jacket height h (mm): 850
  • Active surface ca. [m2]: 4,64
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Add comment
  • Insulation
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Wall
Add comment
  • Internal product contact surface is 2B (IIIc) without further surface treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Insulation,
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Wall 1
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • V2, jacket laser welded
  • Jacket height h (mm): 750
  • Active surface ca. [m2]: 3,2
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Add comment
  • O_OVVR
  • Material: EN 1.4301/ASTM304
Wall 2
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Jacket laser welded, type V1
  • Jacket height h (mm): 1250
  • Active surface ca. [m2]: 6,6
  • Operating pressure [barg]: 3
  • Max. pressure [barg]: 6
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type BM, torispherical head
  • Nominal diameter D (mm): 1750
  • Outside diameter De (mm): 1762
  • Thickness of base material: S=6,0mm
  • Material: EN 1.4301/ASTM304
  • Standard DIN 28011
  • Bottom height (mm): 339
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final surface roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Internal product contact surface is GROUND to final roughness Ra less than 0.8 μm. Gradual grinding with different grit sizes, final grinding with grit size K180.
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
Ring Up
Add comment
  • Reinforcement ring, flat
  • Nominal diameter D (mm): 1800
  • Outer diameter (mm) 1900
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
External Bottom
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 1850
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=60°
  • Bottom height (mm): 1602
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Extrernal Wall
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1035
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2B(IIIc)
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: S=1,5 mm
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Add comment
  • Plate laser engraved
  • Type: Identification PED
  • Size: 145X100
  • Material: EN 1.4301/ASTM304
Add comment
  • Ladder-Holder L420_FI21,3 EN1.4301
Temperature control
Add comment
  • Temperature controller SPR8 JBT 228 mm
Pillow Plate
Add comment
  • Connection V6
  • Mark: 2XG3/4"FM
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V1
  • Mark: 2XG3/4"FM 1XG1/2"FF
  • Material: EN 1.4301/ASTM304
Add comment
  • Connection V2
  • Mark: 2XG3/4"FM 1XG1/2"FF
  • Material: EN 1.4301/ASTM304
Add comment
  • Tubular connection of the jackets
  • Mark: G3/4"ZN 3XDP
  • Material: EN 1.4301/ASTM304
Add comment
  • Ball valve VI 3/4"NN 3/4"NN 1.4301
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: IZO LA A17 PED 7BAR
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Cleaning/CIP
Add comment
  • Tube
  • Size: DN32
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Junction
  • Size: DN32
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle with pipe thread
  • Size: 5/8"_FI10_L30
  • Standard: external thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle DIN
  • Size: DN15
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle DIN
  • Size: DN32
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
N01
Add comment
  • DKC, drain port with tube
  • Size: DN32
  • Standard: DIN11851
  • Type: DKC_L
  • Material: EN 1.4301/ASTM304
N02
Add comment
  • Racking port
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Racking arm DN50 MO DN32
N03
Add comment
  • Level indicator P
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/20
  • Standard: DIN11851
  • Gasket: Tube PVC
  • Material: EN 1.4301/ASTM304
  • Type: Connected with CIP tube
N10
Add comment
  • Nozzle with pipe thread
  • Size: 5/8"_FI10_L30
  • Standard: external thread
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Welded well
  • Mark: FI12/L230
  • Material: EN 1.4301/ASTM304
Add comment
  • Tube for cable
  • Nominal diameter D (mm): 9/12
  • Type: KAB_TER
  • Material: RILSAN
N13
Add comment
  • Level indicator P
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/20
  • Standard: DIN11851
  • Gasket: Tube PVC
  • Material: EN 1.4301/ASTM304
  • Type: Connected with CIP tube
N30
Add comment
  • Nozzle DIN
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Documentation
Add comment
  • Structure drawing
Add comment
  • EU-Declaration of conformity for the pressure vessel acc. to pressure equipment directive PED (2014/68/EU)
Add comment
  • Operation and maintenance manual
Add comment
  • Guatantee statement
Add comment
  • Certificates for pressure retaining parts
Add comment
  • Report - list of welding
Add comment
  • Approval test certificate for welding operator
Add comment
  • Radiographic examination of welded joint
Add comment
  • Report - pressure test
Add comment
  • Report - visual inspection of welds
Packing
Add comment
  • Wooden pallet with casing

Want an offer?

Fill out inquiry form

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.