Frame
- A compact support frame on which tanks and other brewhouse components are mounted. The frame enables easy access to all important connectors and workstations. The piping system and electrical wiring are set up before delivery, which makes brewhouse installation and activation very simple.
- Material: EN 1.4301/ASTM304
- External visible surface is SANDBLASTED with CrNi beads in a sandblasting chamber. Final product surface roughness isn't defined.
Mash mixer / Lauter
Alternative options
Standard
- Combined mash mixer/lauter tun tank (MM-LT), used for mashing and separating the wort from the insoluble parts of the mash (lautering).
- Nominal volume in L: 530
- Nominal volume [bbl]: 4,5
- Nominal diameter D (mm): 1042
- Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
- Insulation: Stone wool, welded jacket
- Material: EN 1.4301/ASTM304
- External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
- Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
- Combined mash mixer/lauter tun tank (MM-LT), used for mashing and separating the wort from the insoluble parts of the mash (lautering).
- Nominal volume in L: 530
- Nominal volume [bbl]: 4,5
- Nominal diameter D (mm): 1042
- Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
- Insulation: Stone wool, welded jacket
- Material: EN 1.4301/ASTM304
- External visible surface is NO.8/TINCU COPPER EFFECT
- Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
- Mixing rakes with stepless speed control (variable frequency drive) via the control panel. Rotation in both directions, outer paddles equipped with engraved liter scale.
- Material: EN 1.4301/ASTM304
- External visible surface is ELECTROPOLISHED
- A mixing paddle that enables turbulent mash mixing and a more homogeneous mash temperature during mashing. During tank emptying, the paddle is used for spent grain removal from the tank bottom.
- Material: EN 1.4301/ASTM304
- External visible surface is ELECTROPOLISHED
- Sieve with conical slots (V-form), surface is polished. Consists of multiple segments that can be easily removed through the tank door.
- Material: EN 1.4301/ASTM304
- Grain removal door: rectangular, outswing, removable. Enables easy spent grain removal.
- Material: EN 1.4301/ASTM304
- Lid
- Material: EN 1.4301/ASTM304
- Sparge
- Material: EN 1.4301/ASTM304
- CIP cleaning
- Material: EN 1.4301/ASTM304
Kettle / Whirlpool
Alternative options
Standard
- Kettle/Whirlpool (K/W), used for wort boiling and centrifugal separation (Whirlpool).
- Nominal volume in L: 675
- Nominal volume [bbl]: 5,7
- Nominal diameter D (mm): 1042
- Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
- Insulation: Stone wool, welded jacket
- Material: EN 1.4301/ASTM304
- External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
- Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
- Kettle/Whirlpool (K/W), used for wort boiling and centrifugal separation (Whirlpool).
- Nominal volume in L: 675
- Nominal volume [bbl]: 5,7
- Nominal diameter D (mm): 1042
- Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
- Insulation: Stone wool, welded jacket
- Material: EN 1.4301/ASTM304
- External visible surface is NO.8/TINCU COPPER EFFECT
- Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
- Lid
- Material: EN 1.4301/ASTM304
- CIP cleaning
- Material: EN 1.4301/ASTM304
- Steam vent
- Material: EN 1.4301/ASTM304
- Wort inlet
- Material: EN 1.4301/ASTM304
- Whirlpool dam
- Material: EN 1.4301/ASTM304
Piping
- Centrifugal sanitary pump for product transfer and CIP cleaning. Stepless flow control (variable frequency drive) via the touch screen control panel.
- Material: EN 1.4301/ASTM304
- Manufacturer ID: LOW
- Brewhouse piping with manifold system. The butterfly control valves for wort and water flow regulation are neatly arranged at the front of the brewhouse. Valve functions are engraved on the pipes by the valves. The valves enable wort circulation during the brewing process without manual pipe switching. Hygienic design (orbital welding, butterfly valves, TC connections, polished pipes).
- Material: EN 1.4301/ASTM304
Supply voltage
- Brewhouse supply voltage
- Supply voltage: 400V 50Hz 3PH
Control Unit
- Touch screen control panel for process control: current and set value display (integrated devices), pump and agitator control, temperature regulation (separate settings for tank jacket and bottom), timer and alarm settings, possible step mashing based on set parameters, supply water temperature display, outlet wort temperature display.
- Material: EN 1.4301/ASTM304
- DODATEK_CENA_1 EUR_BREZ KSV IN TP - VPIŠI SVOJ TEKST
Heat exchanger
Alternative options
Heating
- Thermal oil heating: the brewhouse is equipped with an oil tank, as well as a pump and heaters. The oil tank has a built-in temperature and level probe, as well as overheating protection. Oil temperature and pump operation regulation via the touch screen control panel.
- Input power: 36KW
- Material: EN 1.4301/ASTM304
Documentation
- Declaration of Conformity CE
