FAQ

BHM 4BBL/500L U OIL 230V 60HZ 3PH 2020

  • Compact brewhouse
  • Nominal volume: 4BBL/500L
  • Use: Single-step infusion mashing
  • Use: Multi-step infusion mashing
  • Use: Decoction mashing
  • Market denomination: U
  • Designation 2020
  • Supply voltage: 230V 60Hz 3PH
MATNR: 128410
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Frame
Add comment
  • A compact support frame on which tanks and other brewhouse components are mounted. The frame enables easy access to all important connectors and workstations. The piping system and electrical wiring are set up before delivery, which makes brewhouse installation and activation very simple.
  • Material: EN 1.4301/ASTM304
  • External visible surface is SANDBLASTED with CrNi beads in a sandblasting chamber. Final product surface roughness isn't defined.
Mash mixer / Lauter Alternative options
Add comment
Standard
  • Combined mash mixer/lauter tun tank (MM-LT), used for mashing and separating the wort from the insoluble parts of the mash (lautering).
  • Nominal volume in l: 530
  • Nominal volume [bbl]: 4,5
  • Nominal diameter D (mm): 1042
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Combined mash mixer/lauter tun tank (MM-LT), used for mashing and separating the wort from the insoluble parts of the mash (lautering).
  • Nominal volume in l: 530
  • Nominal volume [bbl]: 4,5
  • Nominal diameter D (mm): 1042
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is NO.8/TINCU CUPPER EFFECT
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Mixing rakes with stepless speed control (variable frequency drive) via the control panel. Rotation in both directions, outer paddles equipped with engraved liter scale.
  • Material: EN 1.4301/ASTM304
  • External visible surface is ELECTROPOLISHED
Add comment
  • A mixing paddle that enables turbulent mash mixing and a more homogeneous mash temperature during mashing. During tank emptying, the paddle is used for spent grain removal from the tank bottom.
  • Material: EN 1.4301/ASTM304
  • External visible surface is ELECTROPOLISHED
Add comment
  • Sieve with conical slots (V-form), surface is polished. Consists of multiple segments that can be easily removed through the side tank door.
  • Material: EN 1.4301/ASTM304
Add comment
  • Grain removal door: rectangular, outswing, removable. Enables easy spent grain removal.
  • Material: EN 1.4301/ASTM304
Add comment
  • Lid
  • Material: EN 1.4301/ASTM304
Add comment
  • Sparge
  • Material: EN 1.4301/ASTM304
Add comment
  • CIP cleaning
  • Material: EN 1.4301/ASTM304
Kettle / Whirlpool Alternative options
Add comment
Standard
  • Kettle/Whirlpool (K/W), used for wort boiling and centrifugal separation (Whirlpool).
  • Nominal volume in l: 675
  • Nominal volume [bbl]: 5,7
  • Nominal diameter D (mm): 1042
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Kettle/Whirlpool (K/W), used for wort boiling and centrifugal separation (Whirlpool).
  • Nominal volume in l: 675
  • Nominal volume [bbl]: 5,7
  • Nominal diameter D (mm): 1042
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is NO.8/TINCU CUPPER EFFECT
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Lid
  • Material: EN 1.4301/ASTM304
Add comment
  • CIP cleaning
  • Material: EN 1.4301/ASTM304
Add comment
  • Steam outlet
  • Material: EN 1.4301/ASTM304
Add comment
  • Wort inlet
  • Material: EN 1.4301/ASTM304
Add comment
  • Whirlpool dam
  • Material: EN 1.4301/ASTM304
Piping
Add comment
  • Centrifugal sanitary pump for product transfer and CIP cleaning. Stepless flow control (variable frequency drive) via the touch screen control panel.
  • Material: EN 1.4301/ASTM304
  • Manufacturer ID: LOW
Add comment
  • Brewhouse piping with manifold system. The butterfly control valves for wort and water flow regulation are neatly arranged at the front of the brewhouse. Valve functions are engraved on the pipes by the valves. The valves enable wort circulation during the brewing process without manual pipe switching. Hygienic design (orbital welding, butterfly valves, TC connections, polished pipes).
  • Material: EN 1.4301/ASTM304
Supply voltage
Add comment
  • Brewhouse supply voltage
  • Supply voltage: 230V 60Hz 3PH
Control Unit
Add comment
  • Touch screen control panel for process control: current and set value display (integrated devices), pump and agitator control, temperature regulation (separate settings for tank jacket and bottom), timer and alarm settings, possible step mashing based on set parameters, supply water temperature display, outlet wort temperature display.
  • Material: EN 1.4301/ASTM304
Heat exchanger Alternative options
Add comment
Standard
Add comment
Heating
Add comment
  • Thermal oil heating: the brewhouse is equipped with an oil tank, as well as a pump and heaters. The oil tank has a built-in temperature and level probe, as well as overheating protection. Oil temperature and pump operation regulation via the touch screen control panel.
  • Power: 36KW
  • Material: EN 1.4301/ASTM304
Documentation
Add comment
  • Instructions for safe use and maintenance
Add comment
  • Guarantee statement
Add comment
  • EU Declaration of Conformity
Kettle
Add comment
  • Steam condenser
  • Material: EN 1.4301/ASTM304








Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.