FAQ

BH3 21 BBL/25 HL U 230V 60HZ 3PH

  • Compact brewhouse
  • Nominal volume: 21 BBL/25 HL
  • Use: Multi-step infusion mashing
  • Use: Single-step infusion mashing
  • Market denomination: U
  • Supply voltage: 230V 60Hz 3PH
  • Type: Two-stage heat exchanger
MATNR: 130836
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Frame
Add comment
  • Walk-on platform with staircase and guardrails. The central layout provides easy access to all workstations and connections, as well as great control and supervision over the entire work process. The anti-slip and washable surface provides a safe work environment and easy maintenance.
  • Material: EN 1.4301/ASTM304
  • External visible surface is SANDBLASTED with CrNi beads in a sandblasting chamber. Final product surface roughness isn't defined.
Mash mixer / Lauter Alternative options
Add comment
Standard
  • Combined mash mixer/lauter tun tank (MM-LT), used for mashing and separating the wort from the insoluble parts of the mash (lautering).
  • Nominal volume in L: 1790
  • Nominal volume [bbl]: 15
  • Nominal diameter D (mm): 1990
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Combined mash mixer/lauter tun tank (MM-LT), used for mashing and separating the wort from the insoluble parts of the mash (lautering).
  • Nominal volume in L: 1790
  • Nominal volume [bbl]: 15
  • Nominal diameter D (mm): 1990
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is NO.8/TINCU COPPER EFFECT
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Mixing rakes with stepless speed control (variable frequency drive) via the control panel. Rotation in both directions, outer paddles equipped with engraved liter scale.
  • Material: EN 1.4301/ASTM304
  • External visible surface is ELECTROPOLISHED
Add comment
  • A mixing paddle that enables turbulent mash mixing and a more homogeneous mash temperature during mashing. During tank emptying, the paddle is used for spent grain removal from the tank bottom.
  • Material: EN 1.4301/ASTM304
  • External visible surface is ELECTROPOLISHED
Add comment
  • Sieve with conical slots (V-form), surface is polished. Consists of multiple segments that can be easily removed through the tank door.
  • Material: EN 1.4301/ASTM304
Add comment
  • Grain removal door: rectangular, outswing, removable. Enables easy spent grain removal.
  • Material: EN 1.4301/ASTM304
Add comment
  • Lid
  • Material: EN 1.4301/ASTM304
Add comment
  • Sparge
  • Material: EN 1.4301/ASTM304
Add comment
  • CIP cleaning
  • Material: EN 1.4301/ASTM304
Add comment
  • Malt hydrator
  • Material: EN 1.4301/ASTM304
Kettle Alternative options
Add comment
Standard
  • Kettle
  • Nominal volume in L: 3200
  • Nominal volume [bbl]: 27
  • Nominal diameter D (mm): 1920
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Kettle
  • Nominal volume in L: 3200
  • Nominal volume [bbl]: 27
  • Nominal diameter D (mm): 1925
  • Temperature control: Heating zones on tank bottom and jacket (laser welded double jacket). Separate heating regulation for bottom and jacket.
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is NO.8/TINCU COPPER EFFECT
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Steam vent
  • Material: EN 1.4301/ASTM304
Add comment
  • Wort inlet
  • Material: EN 1.4301/ASTM304
Add comment
  • Lid
  • Material: EN 1.4301/ASTM304
Add comment
  • CIP cleaning
  • Material: EN 1.4301/ASTM304
Whirlpool Alternative options
Add comment
Standard
  • Whirlpool
  • Nominal volume in L: 2915
  • Nominal volume [bbl]: 24
  • Nominal diameter D (mm): 1990
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Whirlpool
  • Nominal volume in L: 2915
  • Nominal volume [bbl]: 24
  • Nominal diameter D (mm): 1990
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is NO.8/TINCU COPPER EFFECT
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Whirlpool dam
  • Material: EN 1.4301/ASTM304
Hot water tank
Add comment
  • Hot water tank
  • Nominal volume in L: 5600
  • Nominal volume [bbl]: 47
  • Insulation: Stone wool, welded jacket
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Piping
Add comment
  • Centrifugal sanitary pump for product transfer and CIP cleaning. Stepless flow control (variable frequency drive) via the touch screen control panel.
  • Material: EN 1.4301/ASTM304
  • Manufacturer ID: TOPL
Add comment
  • Piping with manifold system on the front. The butterfly valves for wort and water flow regulation are neatly arranged on the front side of the brewhouse. Valve functions are engraved on the pipes by the valves. Hygienic design (orbital welding, butterfly valves, TC joints, polished pipes).
  • Material: EN 1.4301/ASTM304
Supply voltage
Add comment
  • Brewhouse supply voltage
  • Supply voltage: 230V 60Hz 3PH
Control Unit
Add comment
  • Control panel BH
  • Material: EN 1.4301/ASTM304
  • Manufacturer ID: B<(>&<)>R
Heat exchanger
Add comment
Heating
Add comment
  • Steam heating. Threaded steam supply connections on tanks and temperature control via brewhouse control panel. Valves, control panel connections, and steam generator are not included.
Documentation
Add comment
  • Declaration of Conformity CE
Add comment
  • Guarantee statement
Add comment
  • Instruction manual
Mash mixer / Lauter
Add comment
  • Grist case top mounted on brewhouse
  • Nominal volume in L: 1700
  • Nominal volume: 60CFT
  • Material: EN 1.4301/ASTM304
  • External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
  • Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.
Kettle
Add comment
  • Steam condenser
  • Material: EN 1.4301/ASTM304
Heat exchanger
Add comment
  • Tube heat exchanger
  • Material: EN 1.4301/ASTM304
Heating
Add comment
  • Steam pre-piping. Steam supply: all double jackets of a tank are connected via a set of pipes (1") and control valves to a common steam supply line with a 2 1/2" connection on the inlet filter. Condensate discharge: each double jacket outlet has a steam trap with a check valve; all discharge pipes are connected to a common line with a 3/4" internal thread.
  • Material: EN 1.4301/ASTM304








Need some help?

Fill out the form below

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.

* Field is required.
* Field is required.
* Field is required.
* "Country" field is required.
Please, accept the privacy policy and the terms of use.