LTXX 1000 D1000 H1250 0/2,5

  • Brite beer tank without insulation
  • Nominal volume [l]: 1000
  • Diameter internal in mm: 1000
  • Height H in mm: 1250
  • Height Z in mm: 2135
  • External diameter [mm]: 1100
  • Geometrical volume [l]: 1149
  • Use: Beer fermentation and maturation
  • Min. operating press. [barg]: 0
  • Max. operating press. [barg]: 2,5
MATNR: 122390
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=400 mm
  • Tubular leg diameter (mm): Φ114,3 mm
  • Quantity of legs: G=4
  • Leg base thickness (mm): 8
  • Leg base thread: M16
  • Material: EN 1.4301/ASTM304
Add comment
  • Spindle with footplate
  • Thread spindle plate: FI80X39
  • Spindle: M16X100
  • Material: EN 1.4301/RUBBER
  • Mark: HX080-16-100
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Bottom
Add comment
  • Reinforcement plate
  • Material: EN 1.4301/ASTM304
Add comment
  • Type BM, torispherical head
  • Nominal diameter D (mm): 1000
  • Outside diameter De (mm): 1006
  • Thickness of base material: S=3,0 mm
  • Material: EN 1.4301/ASTM304
  • Standard DIN 28011
  • Bottom height (mm): 194
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Internal product contact surface is MECHANICALLY GRINDED to the final roughness Ra<(><<)>0,8μm. Gradual grinding with different granulations, final grinding K180.
Add comment
  • External visible surface is Mechanically brushed with material SCOTCH BRITE. Final roughness isn't defined. Brushing leads to uniform and aesthetic look of the surface.
Wall
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1250
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2R(BA, IIId)
Add comment
  • Internal product contact surface is 2R (BA) without further surface treatment. Stainless steel is protected against scratches with p rotective film.
Add comment
  • External visible surface is Mechanically brushed with material SCOTCH BRITE. Final roughness isn't defined. Brushing leads to uniform and aesthetic look of the surface.
Add comment
  • Plate laser engraved
  • Type: Identification PED
  • Size: 145X100
  • Material: EN 1.4301/ASTM304
Add comment
  • Jacket laser welded, type V1
  • Jacket height h (mm): 1000
  • Active surface ca.(m2): 2,9
  • Working pressure (barg): 3
  • Max. pressure (barg): 6
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type BM, torispherical head
  • Nominal diameter D (mm): 1000
  • Outside diameter De (mm): 1006
  • Thickness of base material: S=3,0 mm
  • Material: EN 1.4301/ASTM304
  • Standard DIN 28011
  • Bottom height (mm): 194
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Internal product contact surface is MECHANICALLY GRINDED to the final roughness Ra<(><<)>0,8μm. Gradual grinding with different granulations, final grinding K180.
Add comment
  • External visible surface is Mechanically brused with material SCOTCH BRITE. Final roughness isn't defined. With brushing we achieve uniform and aesthetic look of the surface.
Temperature control
Add comment
  • Temperature regulation
  • Type: Mounted temperature regulator SPR8, connecting module HSE01 and solenoid valves.
Pillow Plate
Add comment
  • Connection V1
  • Mark: 2XG3/4"FF 1XG1/2"FM
  • Material: EN 1.4301/ASTM304
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: LA A3E D510X15 S-ROC
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Cleaning/CIP
Add comment
  • Tube
  • Size: 1"(25,4x1,65)
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle TC
  • Size: 1"(25)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle with pipe thread
  • Size: G1/4"
  • Standard: female thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle with pipe thread
  • Size: G3/8"
  • Standard: male thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Junction TC
  • Size: 1"(25)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Ball valve
  • Size: G3/8"
  • Material: EN 1.4301/ASTM304
  • Connection1: G3/8"FT
  • Connection2: G3/8"NN
Add comment
  • Pressure gauge A2 0-4bar fi63 1/4"
Add comment
  • Spray ball
  • Nominal diameter D (mm): 40
  • Mark: 4.700.39.04-B
  • Material: EN1.4404 AISI316L
  • Producer ID: VI
  • Connection1: CLIP 22/20 mm
  • Circle diameter: 4,7 M
  • Flow rate: 3,7 M3/H 1 BAR
Add comment
  • Butterfly valve
  • Producer ID: VI
  • Size: 1"
  • Material: EN 1.4301/ASTM304
  • Connection1: TC1"(50,5)
  • Connection2: TC1"(50,5)
  • Handle: Handle ABS, 13 positions
Add comment
  • Heavy duty Clamp A50,5-6/4" TC AISI304
Add comment
  • Gasket TC BS4825 50,5/22,1 EPDM
N01
Add comment
  • DKC, drain port with tube
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Type: DKC
  • Material: EN 1.4301/ASTM304
Add comment
  • Butterfly valve
  • Producer ID: VI
  • Size: 1"1/2
  • Material: EN 1.4301/ASTM304
  • Connection1: TC1"1/2(50,5)
  • Connection2: TC1"1/2(50,5)
  • Handle: Handle ABS, 13 positions
Add comment
  • Heavy duty Clamp A50,5-6/4" TC AISI304
Add comment
  • Gasket TC BS4825 50,4/34,8 EPDM
Add comment
  • Standpipe decanter LMI 75mm
N10
Add comment
  • Sample valve port
  • Size: 1"1/2(38)/50,5
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Sample valve ES/SK TC6/4 1.4301
Add comment
  • Heavy duty Clamp A50,5-6/4" TC AISI304
Add comment
  • Gasket TC BS4825 50,4/34,8 EPDM
N11
Add comment
  • Welded well
  • Mark: FI12/L230
  • Material: EN 1.4301/ASTM304
N13
Add comment
  • Level indicator P
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/22
  • Standard: TC
  • Gasket: Tube PVC
  • Material: EN 1.4301/ASTM304
  • Type: Connected with CIP tube
N30
Add comment
  • Nozzle TC
  • Size: 2"(51)/64
  • Standard: TC
  • Material: EN 1.4301/ASTM304
Add comment
  • Safety Valve
  • Mark: K64VP51.4
  • Producer ID: TASSALINI
  • Size: 2"
  • Material: EN 1.4301/ASTM304
  • Connection1: TC2"(64)
  • Max. working pressure in barg: -0,01/ 2,5
Add comment
  • Clamp TC A64-2" AISI304
Add comment
  • Gasket TC 2" 64,0/47,5 EPDM
N31
Add comment
  • Nozzle with pipe thread
  • Size: G1/2"
  • Standard: female thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Safety Valve
  • Mark: 3369.02.5
  • Producer ID: LOR
  • Size: DN8
  • Material: EN1.4404 AISI316L
  • Connection1: G1/2"ZN
  • Max. working pressure in barg: 2,5
Documentation
Add comment
  • Structure drawing
Add comment
  • EU-Declaration of conformity for the pressure vessel acc. to pressure equipment directive PED (2014/68/EU)
Add comment
  • Operation and maintenance manual
Add comment
  • Guatantee statement
Add comment
  • Certificates for pressure retaining parts
Add comment
  • Report - pressure test
Add comment
  • Report - visual inspection of welds
Add comment
  • Radiographic examination of welded joint
Add comment
  • Report - list of welding
Add comment
  • Approval test certificate for welding operator

Want an offer?

Fill out inquiry form

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.