LTIJ 10000 D2000 H3000 0/+2,5 STAND

  • Brite beer tank, insulated, type LTI
  • Nominal volume [l]: 10000
  • Diameter internal in mm: 2000
  • Height H in mm: 3000
  • Height Z in mm: 4300
  • External diameter [mm]: 2100
  • Geometrical volume [l]: 11017
  • Use: Beer fermentation and maturation
  • Min. operating press. [barg]: 0
  • Max. operating press. [barg]: +2,5
  • Test pressure [barg]: 3,6
MATNR: 124634
Modifications

You have not selected any alternative options or accessories

Your comment
Open/close all
Legs
Add comment
  • Type CN, tubular adjustable
  • Height: N=600 mm
  • Tubular leg diameter (mm): Φ219,1 mm
  • Quantity of legs: G=4
  • Leg base thickness (mm): 15
  • Leg base thread: M24
  • Thread spindle plate: 150X8
  • Material: EN 1.4301/ASTM304
Add comment
  • Leg connection
  • Material: EN 1.4301/ASTM304
Add comment
  • Reinforcement plate
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
Bottom
Add comment
  • Type BM, torispherical head
  • Nominal diameter D (mm): 2000
  • Outside diameter De (mm): 2016
  • Thickness of base material: S=8,0mm
  • Material: EN 1.4301/ASTM304
  • Standard DIN 28011
  • Bottom height (mm): 387
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Internal product contact surface is MECHANICALLY GRINDED to the final roughness Ra<(><<)>0,8μm. Gradual grinding with different granulations, final grinding K180.
Add comment
  • Insulation
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Wall
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Internal product contact surface is 2B (IIIc) without further surface treatment. Stainless steel is protected against scratches with protective film.
Add comment
  • Insulation,
  • Material: PU, machine expanded Polyurethane foam
  • Thickness of base material: S=50mm
Wall 1
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: 2,5
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2R(BA, IIId)
Add comment
  • V2, jacket laser welded
  • Jacket height h (mm): 1250
  • Active surface ca.(m2): 6,3
  • Working pressure (barg): 3
  • Max. pressure (barg): 6
  • Material: EN 1.4301/ASTM304
Add comment
  • O_OVVR
  • Material: EN 1.4301/ASTM304
Wall 2
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1500
  • Thickness of base material: 2,5
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2R(BA, IIId)
Add comment
  • Jacket laser welded, type V1
  • Jacket height h (mm): 1250
  • Active surface ca.(m2): 7,6
  • Working pressure (barg): 3
  • Max. pressure (barg): 6
  • Material: EN 1.4301/ASTM304
Lid
Add comment
  • Type BM, torispherical head
  • Nominal diameter D (mm): 2000
  • Outside diameter De (mm): 2016
  • Thickness of base material: S=8,0mm
  • Material: EN 1.4301/ASTM304
  • Standard DIN 28011
  • Bottom height (mm): 387
Add comment
  • Weld on the external (visible) side chemically treated (CZZ), without grinding, visible weld structure.
  • Internal product contact weld ground (B180ZN) to final roughness Ra less than 0.8 μm (K180).
Add comment
  • Internal product contact surface is MECHANICALLY GRINDED to the final roughness Ra<(><<)>0,8μm. Gradual grinding with different granulations, final grinding K180.
Add comment
  • External visible surface is Mechanically brused with material SCOTCH BRITE. Final roughness isn't defined. With brushing we achieve uniform and aesthetic look of the surface.
Add comment
  • Lifting ring
  • Material: EN 1.4301/ASTM304
Ring Up
Add comment
  • Reinforcement ring, flat
  • Nominal diameter D (mm): 2000
  • Outer diameter (mm) 2100
  • Material: EN 1.4301/ASTM304
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
External Bottom
Add comment
  • Type KC, cone centrical
  • Nominal diameter D (mm): 2100
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Inclination α=11°
  • Bottom height (mm): 204
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • External visible surface is Mechanically brushed with material SCOTCH BRITE. Final roughness isn't defined. Brushing leads to uniform and aesthetic look of the surface.
Extrernal Wall
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1250
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2B(IIIc)
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2B(IIIc)
Add comment
  • Type E, tank wall cylindrical
  • Tank wall height h (mm): 1000
  • Thickness of base material: S=2,0mm
  • Material: EN 1.4301/ASTM304
  • Surface of base material cold-rolled 2B(IIIc)
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • Weld on the external (visible) side striped (BP), partially visible weld structure.
  • Internal product contact weld was not treated after welding (X), visible weld structure.
Add comment
  • External visible surface is Mechanically brushed with material SCOTCH BRITE. Final roughness isn't defined. Brushing leads to uniform and aesthetic look of the surface.
Add comment
  • Plate laser engraved
  • Type: Identification PED
  • Size: 145X100
  • Material: EN 1.4301/ASTM304
Add comment
  • Ladder-Holder L420_FI21,3 EN1.4301
Temperature control
Add comment
  • Temperature controller SPR8 JBT 228 mm
Pillow PlateAlternative options
Add comment
Standard
  • Tubular connection of the jackets
  • Mark: G3/4"ZN 2XDP
  • Material: EN 1.4301/ASTM304
Add comment
  • Tubular connection of the jackets
  • Mark: G3/4"ZN 3XDP
  • Material: EN 1.4301/ASTM304
Add comment
Standard
  • Connection V2
  • Mark: 2XG3/4"FF 1XG1/2"FM
  • Material: EN 1.4301/ASTM304
Add comment
Standard
  • Connection V1
  • Mark: 2XG3/4"FF 1XG1/2"FM
  • Material: EN 1.4301/ASTM304
Manhole
Add comment
  • Oval manway inward opening,
  • Size: 440X310 mm
  • Mark: IZO LA A17 PED 7BAR
  • Gasket EPDM Ethylene propylene
  • Material: EN 1.4301/ASTM304
Cleaning/CIP
Add comment
  • Tube
  • Size: DN32
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle DIN
  • Size: DN32
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Junction
  • Size: DN32
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle with pipe thread
  • Size: 5/8"_FI10_L30
  • Standard: male thread
  • Material: EN 1.4301/ASTM304
Add comment
  • Nozzle DIN
  • Size: DN15
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
N01
Add comment
  • DKC, drain port with tube
  • Size: DN40
  • Standard: DIN11851
  • Type: DKC_L
  • Material: EN 1.4301/ASTM304
N02
Add comment
  • DKC, drain port with tube
  • Size: DN40
  • Standard: DIN11851
  • Type: DKC_L
  • Material: EN 1.4301/ASTM304
N11
Add comment
  • Nozzle with pipe thread
  • Size: 5/8"_FI10_L30
  • Standard: male thread
  • Material: EN 1.4301/ASTM304
N12
Add comment
  • Welded well
  • Mark: FI12/L230
  • Material: EN 1.4301/ASTM304
Add comment
  • Tube for cable
  • Nominal diameter D (mm): 9/12
  • Type: KAB_TER
  • Material: RILS
N13
Add comment
  • Level indicator P
  • Size: DN20
  • Nominal diameter D (mm): Tube 16/20
  • Standard: DIN11851
  • Gasket: Tube PVC
  • Material: EN 1.4301/ASTM304
  • Type: Connected with CIP tube
N30
Add comment
  • Nozzle DIN
  • Size: DN50
  • Standard: DIN11851
  • Material: EN 1.4301/ASTM304
Documentation
Add comment
  • Structure drawing
Add comment
  • EU-Declaration of conformity for the pressure vessel acc. to pressure equipment directive PED (2014/68/EU)
Add comment
  • Operation and maintenance manual
Add comment
  • Guatantee statement
Add comment
  • Certificates for pressure retaining parts
Add comment
  • Report - list of welding
Add comment
  • Approval test certificate for welding operator
Add comment
  • Radiographic examination of welded joint
Add comment
  • Report - pressure test
Add comment
  • Report - visual inspection of welds
Packing
Add comment
  • Wooden pallet with casing
Bottom
Add comment
  • V7, pillow plate on bottom BM
  • Jacket height h (mm): 1000
  • Active surface ca.(m2): 1,1
  • Working pressure (barg): 3
  • Max. pressure (barg): 6
  • Material: EN 1.4301/ASTM304
Pillow Plate
Add comment
  • Connection V7
  • Mark: 2XG3/4"FM
  • Material: EN 1.4301/ASTM304

Want an offer?

Fill out inquiry form

We approach every project individually, with every customer's wish and need in mind. A group of experts from various fields work together to find the best solution for our investor. How can we help you? Fill out our form or call us and tell us about your plans. Together, we'll find the right answer.